MicroMaxX Aseptic injectable powder filling machine
Automatic indexed motion microdosing machine for the dosing of sterile powders into glass vials in sterile environment, by means of vacuum/pressure system and subsequent closure with rubber stoppers
Benefits
- Slim table top structure
- Linear transport system
- Suitable for both high speed powder filling and high speed liquid filling
- Easy assembly and disassembly of dosing disc from machine front side
- Use of brushless servomotor technology

Dosing system
Technical Highlights
- 100% in-line CW at full speed.
- One or two different powders filling.
- Servo motor drive control.
- Matching fastest speed in the market (up to 24.000 vph) with potential to exceed it.

Rubber stopper unit

Gross check weigher
Technical Data
MicroMaxX 18 | MicroMaxX 24 | |||
Vials Diam., mm (min./max) | 16 - 52 | 16 - 32 | 16 - 52 | 16 - 32 |
Vials H., mm (min./max) | 35 - 110 | 35 - 75 | 35 - 110 | 35 - 75 |
Max. output (vph) Single dose per dosing disc, no C.W. |
9,000 | 18,000 | 12,000 | 24,000 |
Max. output (vph) Single dose per dosing disc, 100% C.W. |
6,000 | 12,000 | 12,000 | 24,000 |
Min./Max. dose (single shot per dosing disc), mg Min./Max dosage can change in relation to powder specific weight |
30 – 1,500 | |||
Dosing disc | 1 / 2 | |||
Dosing chambers per disc | 12 | 12 + 12 | ||
Power consumption (kW) Without L.F. – With L.F. |
12.7 – 16.7 | |||
Compressed air for powder ejection (at 7 bar) | 120 Nl/min. |
Delivering Solutions
Downloads
- Datasheet
pdf / 190 kB